Smart analysis and monitoring

Our company, in its continuous evolution and improvement of solutions for the client, has implemented, within the services we provide, the “intelligent analysis and monitoring” of the electrical installation, in order to obtain an energy improvement, seeking savings and optimizing energy consumption.

 

Functions and Object

With this complementary and value-added service to our equipment, we provide information (it could be up to daily) on the customer’s consumption curves, not only to verify the efficiency of our equipment, but also to warn of supply failures (power outages). voltage), changes or peaks in reactive consumption or production, consumption of work lines outside of periods, consumption comparisons, alerts, etc.
We carry out intelligent analysis and monitoring through sophisticated software that analyzes in detail the reading of consumption curves extracted directly from the customer’s meter. The potential of the platform allows us to generate a multitude of reports on the behavior of our client’s installation, so that we provide very valuable information for monitoring the “energy efficiency” project that the client has entrusted to us.

 

Smart Analysis

Smart analysis is the first step to control and monitor our energy efficiency equipment. This service has no cost to the customer and with it we intend to give added value to our TP series equipment, by delivering a series of high-value reports to the customer in relation to the behavior of their installation before installing the corresponding equipment. and the one that has subsequently, making the corresponding comparisons and analyzing the influence of our equipment in said behavior on the values ​​of energy consumed, both active, reactive, and power.

All the information comes from the company’s meter installed to the client, so the validity of the data is absolute.
Next, we mention the main functions that we carry out, as well as the reports that are generated automatically for the client:
-Obtaining consumption curves and reporting incidents by reading the customer’s meter (except for “Prime” meters)
-Analysis and interpretation of the information obtained through the GCE platform.
-Creation of the “ENERGY EFFICIENCY” project with the monitoring baseline based on the performance of our TP series energy saving equipment.

-Generation of reports sent to the client via email, quarterly:

  • Report on “Analysis and Calculation of Cos Phi and Reactive Energy Production Simulation”.

 

 

 

  • Report “Comparison of Periods”. By default, a month is compared with the previous one in terms of costs and energy production.
    Report “Information on the status of the project” (from the third month).

 

Energy Monitoring and Surveillance (annual contract)

Through very low cost solutions, such as telecalling the company meter or virtual gateways, we have the possibility of offering our clients energy monitoring and surveillance services.
These services are made up of analyzes, reports, alarms and alerts for which Green Corporate Energy establishes monthly or annual fees for its customers depending on the type of alarm and service that is being offered or requested. Alarms can range from the most widespread (such as those seen below) to others designed for specific customers and facilities.

 

BEHAVIOR TIMES AND CURVES ANALYSIS

The hourly analysis of consumption curves from face-to-face readings, telecall to the meter or individual lines through submetering allow studying the behavior of facilities throughout the different hours of the day.
These analyzes can be carried out by selecting the entire period or by filtering only the hours that you want to choose, for example, to see the consumption in the productive period or when there is no one.

 

 

SIMULATION AND VALIDATION OF INVOICES

Thanks to MONITORING, our platform allows the simulation of electricity bills, so that the bills that come to our customers from the marketer can be satisfied.
At the same time, for massive deployments, we are also capable of validating electronic invoices in XML format of up to 50 points of a single shipment, allowing an automatic and agile verification of invoices of multipoint installations.

 

DAILY ANALYSIS AND HEAT MAPS

Heat maps, both daily and by days of the week, reveal patterns of behavior, abnormal consumptions and oversights that the customer can discover and identify.
The ability to filter by days of the week and hours allows very precise studies of different modes of behavior in the facilities.

 

 

CONSUMPTION ALARMS

Through MONITORING, out-of-hours consumption can be detected and notifications sent via email or remotely activated on relays * to turn off lines.
These oversights may be caused by bugs or misconfiguration in programmers or human oversights.

 

POWER OPTIMIZATION. ALARMS FOR EXCESS OF POWER

The optimization of the contracted power is associated with the assumption of the payment of certain penalties for excess power. In some rates these can be especially critical and avoiding them can save important payments to customers.

“Power Optimization” Report

 

MONITORING IN REAL TIME allows us to anticipate these excesses and notify our client
or act on these lines * for load shedding.

 

(*)Requires additional equipment

 

ALARMS FOR EXCESS OF REACTIVE ENERGY

Through MONITORING, the failure of reactive energy compensation systems can be detected.
These breakdowns can entail very costly penalties for our client, and their early detection is an essential service for us. As is already known, our TP series energy efficiency equipment performs the function of compensating and reducing reactive energy, but they are also compatible and work in parallel with other systems such as capacitor banks, helping them to function more efficiently. and extend their useful life, in addition to supplementing them in cases of peaks or demands higher than those that were initially dimensioned.

 

ALARMS FOR POWER FAILURE

The cuts and micro-cuts from 1 second are detectable and are registered in the company meter. Through MONITORING these failures in the power supply can be detected.
This monitoring can be configured to send warning alarms at the moment in which it is detected that one of these incidents has occurred, as well as being able to cross it with other data of the installation to see the effect it may have had.
These failures can be critical in facilities that must maintain cold rooms, for example. The immediate notice to the client is one of the services that we can offer.
In addition, the GREEN CORPORATE ENERGY platform can provide details of the cut extracted directly from the meter, which allows to demonstrate that there has been a supply interruption, necessary to be able to make any claim for damages.